Get Started with NXP S32K144EVB for Automotive and Industrial Applications. MCU features, Board features, PinOut, SDK and IDE installation with debugging
See around yourself, we all are surrounded by electronic gadgets around ourselves. The mouse which you are using to navigate through desktop, the Earphones via we all used to listen to music and show off our styles while traveling!!!, the doorbell we ring in homes and see who is outside through video, wireless car keys […]
Table of Contents In the last blog of HLW8012 energy metering IC, we have got an overview and understanding of HLW8012 IC. So now in continuation to that blog, in this blog, we are going to develop the Application driver for HLW8012. But before preceding with the Application Driver, we will see the hardware setup. […]
Table of Contents So hello guys, welcome back to Gettobyte Once again. Todays blog is going to be on interfacing the Energy metering IC : HLW8012 which is manufactured by HLW Technology.On previous blogs we have developed the application driver for W25Q SPI based flash memory’s, is time we are going to develop the […]
Table of Contents So continuing with the blog series of, W25Q128 SPI based flash memory\’s , in the previous blogs W25Q128JV SPI Flash Memory: Part1 | gettobyte W25Q128JV SPI Flash Memory: Part2 | gettobyte we have gone through the introduction and overview for W25Q128JV flash memory\’s. From this blog we are going to start with […]
What are Peripherals in MCU? What is peripheral driver in MCU? What is sensor/module interfacing in MCU. What is device driver and RTD? What is HAL/BSP? What is Application Software? When people start with Embedded Software development or Firmware development, there are couple of terms which they come across and found them very confusing to understand. […]
Table of Contents So guys this is the continued blog on my interfacing W25Q128JV SPI flash memory with STM32 and AVR MCU. So in the last blog we have started with W25Q128 overview, its features and pin descriptions. Now in this blog we are going to talk about following topic: SPI standard instructions. Status and […]
Table of Contents W25Q128JV SPI Flash Memory interfacing with STM32 and AVR MCU So hello guys, welcome back to the Gettobyte once again. As I have told you that we are going to start with application codes also, so now in this blog what we are going to do?? We are going to interface the […]
In this example, we will make animations by turning off and on Leds with some delays. We could simply do it like this. We could simply do it like this. PORTB=0B10101010; _delay_ms(1000); PORTB=0B01010101; _delay_ms(1000); . . . PORTB=0B01000001; _delay_ms(1000); But instead of writing like this, we would use the function Led_pin( ). It will reduce […]
Embedded C is an extremely popular programming language when we talk about electronic devices. If you wanna go for robotics it would be a good start for you. In our day-to-day life, we use mobile, laptops, and fridges every electronic device we use is made up of using embedded C. Now without wasting any time […]