UART stands for Universal Asynchronous Receiver/Transmitter. It communicates asynchronously. UART can work with different types of serial protocols that involve transmitting and receiving serial data. UART is not like other protocols it is a physical circuit built-in microcontroller or a dedicated IC. In old computer systems, devices like mouse or printer Uart was used for […]
Why do we need a rectifier Circuit? Whenever DC power is needed that time, we need to convert an AC Power to DC Power and that process is known as Rectification. A simple PN junction diode acts as a rectifier. The forward biassing and reverse biassing conditions of the diode makes the rectification. Types of […]
Static is a keyword in the c/cpp language. It is a storage class specifier that can be applied to any data type. A static keyword can be used with both variables and functions. The static keyword tells the compiler to make the variable or function limited to scope but allows it to persist throughout the […]
Here we will understand the basic terms related to microcontrollers.
Introduction to the SPI SPI stands for Serial Peripheral Interface. It is one of the most widely used interfaces between the microcontroller or other peripheral devices such as sensors, shift registers, etc. It uses a Synchronous communication protocol [It shares a clock signal for synchronizing bits between 2 devices] for the communication between a Master[ […]
Hello Friends, This is the second blog of the series of PCB designing. Today we are discussing Steps for PCB Designing, Types of Component and methods for mounting components onto a PCB and designing steps. So before discussing the Method for Mounting Components on PCB, first we will discuss the process or different stages of […]
Here we will understand the basic terms related to microcontrollers.
Compiled language: are translated to the target machine\’s native language by a program called a compiler. This can result in very fast code, especially if the compiler is effective at optimizing however the resulting code may not port well across the operating system & the compilation process may take a while e.g C or CPP. […]
Table of Contents Introduction AVR stands for a Alf and Vegard’s RISC processor and is a microcontroller. Microcontroller is like a mini computer or a processor dedicated for a particular task. We can code AVR using C, C++ or Assembly language. AVR PINOUT Brief description of AVR pins Pin 1 – Pin 8 (PB0 – […]
Table of Contents Overview on Nordic IoT Chips Nordic Semiconductor is a semiconductor MNC, which designs & develops a wide range of SoCs supporting IoT protocols. These SoC’s have all functionalities of Microcontroller(MCU) based on ARM cortex Processors, plus they embed 2.4ghz RF transceivers into the chips using RF-CMOS technology for making IoT chips. NRF52 […]